Industrial 18gpm, 120V Goldstream Oil Transfer Pump

Fixed mount, continuous duty, 18 GPM. The mid-range industrial unit in the Goldstream stationary lineup. Pairs a cast iron gear pumphead with an adjustable pressure relief valve and a 1.5HP Baldor motor at 1800 RPM. Built for processing applications where the outlet may be restricted.

The pressure relief valve is factory set at 43 PSI and is adjustable. It recirculates fluid internally when outlet pressure exceeds the set point, protecting the pump and motor from deadhead damage. Safe to run against filters, centrifuges, and partially restricted outlets. Ships unwired.

The Pumphead

Cast iron positive displacement gear pump with adjustable pressure relief valve, factory set at 43 PSI. Self priming with 15 ft suction height. 1 inch NPT ports. Continuous duty rated. Carbon steel gears, Viton seals.

The Motor

Stock US Made Baldor motor, 1.5HP, 1800 RPM, 120/230V 60Hz, single phase. Ships unwired. Wire for 120V or 230V depending on your installation. Requires hardwiring by a qualified electrician.

Specifications

• Pumphead: Industrial Cast Iron Positive Displacement Gear Pump with Adjustable Pressure Relief
• Motor Speed: 1800 RPM
• Flow Rate: 18 GPM
• Self Priming: Yes
• Suction Height: 15 ft
• Port Size: 1 inch NPT Inlet and Outlet
• Pressure Relief: Yes, adjustable, factory set at 43 PSI
• Seals: Viton (high temp)
• Duty Cycle: Continuous
• Motor: 1.5 HP, 120/230V 60Hz, Single Phase
• Wiring: None, ships unwired, wire for 120V or 230V
• Mount: Fixed, includes industrial baseplate

What's in the Box

• Industrial Cast Iron Gear Pumphead with Adjustable Pressure Relief Valve
• US Made Baldor Motor (1.5 HP, 1800 RPM, Single Phase)
• Three piece shaft coupler with rubber element
• Industrial Baseplate

Note: Hoses and wands are sold separately. No switch, plug, or handle included. Requires hardwiring by a qualified electrician.